Dries to the touch in 30 minutes at 25☌ and 50% relative humidity. Not for use on floors, in high corrosion areas or in areas with very high humidity. For stain-blocking, use a high quality primer such as BEHR Multi-Surface Interior/Exterior Stain-Blocking Primer & Sealer No. May be tinted with up to 118 mL of universal colourant per 3.78 L. Thinning will adversely affect drying properties, film build, appearance, adhesion and overall performance properties. If necessary, add no more than 237 mL of water per 3.78 L. Does not include loss of material from spraying. Coverage: 16 – 26 m2 (175 – 275 sq ft) per 3.78 L, depending on application method and substrate porosity. If brush or roll application is necessary, multiple coats may be required to achieve target film thickness, hide, coverage and overall product performance. NOTE: Formulated specifically for airless spray application. Use this product when the surface and air temperatures are between 10 – 43☌. Eye protection, protective clothing and a NIOSH approved respirator are recommended. Remove all rust and prime with appropriate rust-inhibiting primer and/or spot prime rusty areas such as weld spots on steel surfaces. 
Fill all gaps with paintable sealant and allow to completely dry prior to coating. Use a concrete and masonry surface prep product or mechanical means on smooth masonry for maximum adhesion. The pH must be 10 or lower prior to coating. Masonry: All masonry surfaces must be cured at least 30 days before painting. Glossy surfaces must be de-glossed prior to coating. #Behr pro paint reviews free
All surfaces must be clean, dry, free of dust, chalk, oil, grease, wax, mold and mildew stains, loose and peeling paint and all other foreign substances. Apply this coating to primed or previously coated surfaces. The following steps are recommended for product performance. Surface Preparation Blank space if empty. 
Use on properly prepared interior ceilings and overhead substrates such as drywall, gypsum board, concrete, plaster, wood, ferrous metals, and non-ferrous metals.
0 kommentar(er)
